LYNICESHOP Hot Melt Glue Dispenser, 110V 900W Adhesive Dispenser Hot Melt Glue Gluing Dispensing Machine Adhesive Injecting Dispenser Equipment 3KG/HR for Industries Electronics Bonding Fixing

DescriptionA good tool is indispensable for tedious operations. Our hot melt glue dispenser can help you do it. Made of iron and aluminum, and adopting exquisite painted technology, this item ensures that you can use it for a long time. Good performance and simple operation can make your work more efficient. It will be a powerful assistant in your work.Preparation for Operation:1. Confirm the safety protection measures.2. Check if the machine is 110VAC and make sure that the pressure will not fluctuate.3. See if the temperature of the plastic bucket is set at about 302°F(different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier).4. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.5. Check if the air supply system is basically dry and the air pressure is stable6. Power on and test the circuit of each part.Boot Steps:1. Connect the power and turn the power switch to “ON”.2. Check if the temperature of the temperature controller is within the above range.3. Check whether the pressure relief is turned in the direction of pressure holding.4. Connect the origin, set the pressure value, and start the operation.Shutdown Steps:1. Release the foot switch to cut off the main power2. Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0.SpecificationColor: BlueModel: YT-X001Material: Iron and AluminumSurface Treatment: Painted, Sprayed with TeflonStyle: ModernShape: RectangularNumber of Items: 1Assembly Required: YesMount Type: CountertopVoltage: 110V 10APlug Model: PSB-10Max Power: 1250WMax Voltage: 10A 125VSol Speed: 3kg/h, 6.61lbs/hSolvent Capacity: 3kg/h, 6.61lbs/hMaximum Viscosity: 10000 CPSPlug Type: US StandardPower: 800WWorking Temperature: Over 150°C/302°FTemperature Control Range: 150-200°C/302-392℉Pressure Range: 4~10kg/8.82~22.05lbsLength of Power Cord: About 2m/6.56ftPackage Included1* Hot Melt Glue Dispenser1* Pedal Switch1* Conversion Plug1* Pressure Gauge

• 🌟Premium Material: High-quality iron and aluminum make this hot melt glue dispenser solid, wear-resistant, impact-resistant, and rustproof, so it can keep beautiful and practical without frequent replacement. The shell of the hot melt glue dispenser is painted, and the aluminum barrel is sprayed with Teflon to prevent adhesion, so this item is smoother, brighter, more wear-resistant, thus extending its service life.
• 🌟High Efficiency: 800W power, 6.61lbs/h sol speed and solvent capacity, and 10000CPS maximum viscosity can improve your work efficiency, save labor and cost. The temperature can be adjusted in the range of 302-392℉, and the pressure can be adjusted in the range of 8.82-22.05lbs, which are very convenient and conducive to making more beautiful and standardized items.
• 🌟Multiple Functions: The hot melt glue dispenser is mainly used for gluing in hot melt glue dispenser processes, as well as other liquid precise points, injection, and application to the exact position of each hot melt glue dispenser, and can be used for dotting, marking, circular or arcing. With its good performance, this hot melt glue dispenser can be used as a gift for family or friends engaged in manufacturing or operating relevant stores, making their work more efficient.
• 🌟Safety Guard: The uniform heat dissipation holes, pressure retaining design, and over-temperature protection function can timely reduce the temperature of the hot melt glue dispenser during operation, avoid potential safety hazards, and extend the service life of the hot melt glue dispenser.
• 🌟Simple Installation and Operation: The simple structure, convenient switches, practical pedal, clear pressure gauge and indication, and two models(manual and automatic) allow you to complete the installation and accurately control the amount of glue and free up your hands. The smooth surface allows you to easily remove dust and residues with a towel and water.